Huawei e5785lh92a unlock For all Networks e5785lh92a imei repair

############################# Video Source: www.youtube.com/watch?v=YvSXRW7oxdQ

H96 Pro Plus Firmware Upgrade To Android 7.1 - https://wp.me/p7Izmk-iM • GearBest - http://shrsl.com/14fbg GeekBuying - http://shrsl.com/15oqa Banggood - http://shrsl.com/15oqb DD4 - http://shrsl.com/15oq9 Newfrog - http://shrsl.com/15oq • SD card process firmware - https://drive.google.com/open?id=0B87... • Burn tool - https://drive.google.com/open?id=0B87... • Latest 08/09/2017 v7.1.2 firmware link. PLEASE NOTE!!! this latest firmware can only be installed using the USB Burning tool process. And yes I have personally tested it. https://drive.google.com/open?id=0B87... don't forget to copy and paste the license folder and overwrite the license folder in the USB burning tool installation folder, or else the update will not work. • Original firmware Android 6.0 in case you need to go back - https://drive.google.com/file/d/0B87M... • New stock firmware Android 6.0 Kodi 16.1 to restore back to factory defaults. – https://drive.google.com/file/d/0B87M... • This is a simple step by step tutorial for the H96 Pro+ Firmware Upgrade To Android 7.1 Nougat. This firmware update is for the first release of the Alfawise H96 Pro+, as well as for similar H96 Pro+ with different branding it does not matter. So follow the steps in the video and upgrade the Android 7.1 and enjoy all the new features. • • Complete the following steps. • Step 1. Download the Burn card software, and the latest firmware from the description area below this video, or from my product page. • Step 2. Unzip the Burn card software into a folder, this is not an installation file, just a standalone program. • Step 3. Unzip the firmware into a folder. • Step 4. Insert the SD card into the SD card slot on your PC. and take note of the drive letter. • Step 5. Open the folder where you unzipped the program, and run the burn card program. • Step six. The program starts in Chinese, an you have to switch to English by selecting the writing in the top left corner, and select the check box where it says English version. Click OK to close the option, and then exit the program and restart it again to get it in English. • Step 7. Once restarted, at the top select choose disk. and select the drive that the SD card is inserted. • Step 8. Check the four check boxes, and click the browse button and open the firmware folder. and select the image file. • Step 9. Once you have selected the firmware image file, click the make button. You would be promoted to format the SD card, click the start button and wait for the card to be formatted. Once the formatting is completed, click the close button and the burn process will start automatically. Once the burn process is completed, click the OK button and close the program. • Step 10. Remove the SD card from the PC properly, by right clicking on the drive and selecting eject. • Step 11. Connect the TV box to your TV, insert the SD card into the SD card slot, and do not plug in the power cord at this time. • Step 12. Using your paper clip press and hold the reset button below the box. While pressing and holding the reset button, plug in the power cord and wait until you see the box starts. Release the reset button and the upgrade would begin immediately. This process takes a few minutes, and once completed the box will reboot automatically.

#############################

New on site