DLink How to Setup DIR825M Router

############################# Video Source: www.youtube.com/watch?v=jl0o1es3VH8

Setting up a D-Link DIR-825M AC1200 router involves several steps, including physical connections and configuration through a web browser. Here's a general guide to help you set up your router: • Note: Before you begin, make sure you have the following items ready: • D-Link DIR-825M AC1200 router • An Ethernet cable (usually included with the router) • A computer or mobile device with Wi-Fi capability • An active internet connection from your Internet Service Provider (ISP) • Step 1: Physical Connections • Unbox the router and plug it into a power source. Connect the power adapter to the router and a power outlet. • Connect one end of the Ethernet cable to the WAN (Internet) port on the router. • Connect the other end of the Ethernet cable to your modem. This cable should be coming from your ISP. • If you want to connect a computer or device directly to the router using an Ethernet cable, plug it into one of the LAN ports on the router. • Wait for the router to boot up. This may take a minute or two. • Step 2: Access the Router's Web Interface • On your computer or mobile device, connect to the Wi-Fi network broadcast by the router. The default Wi-Fi network name (SSID) and password should be printed on a sticker on the router. • Open a web browser (e.g., Chrome, Firefox, Safari) on your device. • In the address bar, type the default IP address for D-Link routers, which is typically one of the following: • http://192.168.0.1 • http://192.168.1.1 • Press Enter to access the router's login page. • Step 3: Log In to the Router • You will be prompted to enter a username and password. By default, the username is usually admin, and the password may be left blank or set to admin. Check your router's manual or the label on the router for the correct login credentials. • Once logged in, you should be in the router's web-based configuration interface. • Step 4: Configure the Router • Follow the setup wizard or navigate to the setup section of the interface. You may need to select your time zone, set up a Wi-Fi network name (SSID), and choose a strong Wi-Fi password (WPA/WPA2 key). • You can also configure other settings, such as parental controls, guest network, and port forwarding, based on your preferences. • Save your settings when you're done, and the router will apply the changes. • Step 5: Test Your Connection • Disconnect and reconnect to the Wi-Fi network using the new SSID and password you set up. • Test your internet connection to ensure it's working correctly. • That's it! Your D-Link DIR-825M AC1200 router should now be set up and ready to provide wireless internet access to your devices. If you encounter any issues or need further assistance, refer to the router's user manual or contact D-Link support for help. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • #dlink • #dlinkrouter • #setup • #configuration

#############################

New on site