How to Repair a VMware Workstation Virtual Disk

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=-4xg7iUb-Lg

🔔 Download Free AOMEI Partition Assistant Now 👉 https://www.aomeitech.com/llyy/downlo... • 🔔 Related Reference How-To Article 👉 https://www.diskpart.com/diskpart/vir... • ----------------------------------------------------------- • ✅ 【Virtual Disk Service Error the Object is Not Found】 • ⏰ 0:00 Start • ⏰ 00:54 Create Primary Partition with AOMEI Partition Assistant • ⏰ 02:48 Other Solutions for “The Object Is Not Found” Error • ----------------------------------------------------------- • ✅ 【Detail】 • Some users may encounter this situation - when they tried to create a primary partition with diskpart, then they got the error message saying Virtual Disk Service error: The object is not found. Diskpart would fail us owing to different kinds of reasons. In this case, achieving the goal with the help of other tools as soon as possible is definitely a wise choice. • AOMEI Partition Assistant Standard is free hard drive partition software, with this easy-to-use partition manager, you can easily solve the “Diskpart the object is not found” trouble, and create both primary partition and logical drive effortlessly on that disk. • 1. Launch AOMEI Partition Assistant on your PC. Here you can view all your disks and their info. • 2. At the main interface, right-click the space you want to create the partition with and select Create Partition. • 3. In this pop-up page, specify the size, the drive letter, and the file system of the new partition. Click on Advanced in the lower-left corner, and you are able to set partition label, partition type (primary or logical), unallocated space before/after, and SSD partition alignment as displayed. • 4. Now, preview the result. Click Apply to commit the operations. The process will be completed in a short while. • In fact, the causes for the error are various. Apart from the Diskpart flaw, you are likely to get a similar prompting message in other situations. Firstly, when you try to modify an OEM Recovery Partition, Due to the OEM Recovery Partition was created by the PC’s manufacturer and usually cannot be altered by general users, you will get this error. • Besides, you would get the “The object is not found” error in Diskpart when the disk is failing and cannot hold a partition anymore. You can run CHKDSK /f on that disk to check the hard drive for errors. If disk failing is the case, it is suggested to create a backup for the disk first and then perform data migration with a healthy hard drive. • 1. Run AOMEI Partition Assistant. • 2. At the main console, right-click the failing disk and select Clone Disk. • 3. Choose the clone method from the given options according to your own situation. Let’s select the first one for example. • 4. Select the healthy hard drive as the destination disk. If it is an SSD, tick the option Optimize the performance of SSD. • 5. On this page, adjusting partition size is available. • 6. View the virtual result. Disk 2 should contain all partitions on Disk 3 now. Click Apply to execute the pending operations. • #virtualdisk

#############################

New on site