Youtor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=-N7JR5xnk9Q
Maintenance on 6-speed DSG DQ250 transmission! • Transmission oil change / renewal of the oil pan and mechatronics removal and installation using the example of a VW Passat 2.0 TDI, 2012. • In our video on the DQ250 6 -speed DSG, we go into detail on 3 components of the transmission. • We change a rusty oil pan, show a quick transmission oil change and highlight the removal and installation of the mechatronics. Here we change the control board and renew the seals on the electronics plug. We also replace the combined oil temperature and speed sensor located under the mechatronics. • Chapter: • 00:00 Intro • 00:17 Introduction • 00:57 Oil pan leak + EXPERT KITS+ V10-5138 • 02:46 Mechatronics removal • 05:04 Replace mechatronic board and replace seals • 06:49 Replacing the speed sensor behind the mechatronics • 07:53 Installing the mechatronics • 08:49 Fitting the new oil sump • 10:05 Checking the mechatronic board (we also recommend a resistance and visual check) • 10:34 Fill up gearbox oil and check oil level • 10:51 Completion of work and end • You can find further information on the subject of gearbox maintenance here: • www.vaico-getriebeservice.de • Our products can be purchased locally or online via wholesalers! • On our website you will find a wide range of car spare parts that may be of interest to you: http://www.vierol-shop.de/ • We hope this video has been helpful to you. • Click like , subscribe to our channel and watch out for updates. VAICO on social media: • ☛ Facebook: / brandvaico • ☛ YouTube: / brandvaico • ☛ Instagram: / vaico_germany • Disclaimer safety information The video only contains advice and recommendations that may be helpful to you during repairs and replacement. The vehicle manufacturer's specifications and instructions must always be followed exactly. VIEROL AG is not liable for any damage, injury or loss of value resulting from improper repairs and incorrect interpretations. This video is for information purposes only and does not guarantee any particular result. VIEROL AG recommends that installation be carried out by trained specialists only. The user alone is liable for incorrect and improper handling of tools and car parts. VIEROL AG expressly recommends that all safety rules be followed during all repair work and that personal protective equipment be worn. Used oils and operating materials must be disposed of in accordance with local regulations!
#############################
