Youtor
How to Terminate Cat6 Shielded Cable with an RJ45 Connector
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=-bQjrDirT6g
Terminating Cat6 shielded cable can be tricky with a standard RJ45 connector that is not pre-booted. In this detailed tutorial video, see the expert best practices for how to terminate Cat6 shielded cable with a standard RJ4 plug for a custom-length cable with full 360º shielding. For Cat 6 cable termination color code (568B), see the image here at 08:45. • Cat6 color code order: 1) White/Orange, 2) Orange Solid, 3) White/Green, 4) Blue Solid, 5) White/Blue, 6) Green Solid, 7) White/Brown, 8) Brown Solid • Skip to Chapters: • 00:00 Intro, How to Terminate Cat6 Shielded Cable with a Standard RJ45 Connector • 00:36 Slide up the 3:1 heat shrink tubing onto cable • 00:54 Measure your cable jacket for stripping • 01:17 Score and cut the jacket from the conductors • 01:38 Shielding must be removed from the exposed wires • 01:55 What to do with the drain wire on CAT6 cable termination • 02:03 What to do with the clear binder material • 02:21 Remove the center separator • 03:05 Secure the drain wire with copper tape, and why for best practices • 03:30 Placement of the copper tape • 04:00 Untwist the pairs for CAT6 cable termination • 04:37 Color code for 568B Cat6 cable • 05:20 Cut any extra length on conductors to 1” • 06:05 One piece RJ45 connector vs two piece RJ45 connector • 06:13 How to slide on the load bar Cat6 • 06:58 How to trim conductors to 3/10” (approx. 7 cm) • 07:32 Prepare the RJ45 connector • 08:01 Crimp down the cable diameter to an oval in order to fit into the RJ45 connector • 08:20 Seat the RJ45 connector properly to the color code • 08:45 Cat6 color code order image showing visible copper ends • 08:51 Bend the strain relief over • 09:01 RJ45 crimping tool for Cat6 cable termination • 09:33 Inspection and what to look for • 09:49 Slide 3:1 heat shrink tubing up over the connector body • 10:22 Carefully heat shrink tubing to secure the connector without compromising the conductors • 10:52 Applying the heat to shrink tubing with heat gun • 11:05 Fully terminated a Cat6 Shielded cable with an RJ45 connector with a solid 360 degree shield contact • 🗽 • This is a Pro AV tutorial video as a video production portfolio piece created and produced by Angie Durbin in collaboration with Liberty AV Solutions. • Angie is a New York-based creative director, artist, and multimedia designer. • ................................ • 👋🏼📱 SOCIALS • 🟢 Design Portfolio: https://www.angiedurbindesigns.com/ • 🔴 Art Website: http://www.angiedurbinart.com/ • 🟠 Instagram: / • 🔵 LinkedIn: / angie-durbin • 🔵 Facebook: / • ................................ • ✅ Subscribe to Angie's channel for more videos like this! https://www.youtube.com/@AngieDurbinA... • ................................ • 📰 Subscribe to Angie's newsletter here for freebies and creative inspiration: https://www.angiedurbinart.com/contact • #Cat6CableTermination, #HowToTerminateCat6
#############################
