Youtor
SRAM MTB Brakes How to Replace Top Load Brake Pads
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=-n9TF6JGzq8
How to: Replace Top Load Brake Pad • 1. Remove the wheel from the bicycle according to the wheel manufacturer's instructions. • 2. Use needle nose pliers. • 3. Remove the e-clip. • 4. Use a 2.5 mm hex wrench. • 5. Remove the pad retainer bolt. • 6. Remove the brake pads from the caliper. • 7. Use a plastic tire lever. • 8. Push the pistons back into the caliper. • 9. Install the brake pads into the caliper. • 10. Install the pad retainer bolt. • 11. Install the e-clip. • 12. Install the wheel according to the wheel manufacturer’s instructions. • 13. Pull the lever to advance the pads to the rotor. • Subscribe to the SRAM channel → / @sram
#############################
