Youtor
How to wire wrap a briolette
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=0EDzrw3IJZg
how to wire wrap a briolette: • 26 gauge in a gauge or wire that fits through the hole. Most beads can be wrapped with 24-26-28g) • Briolette gemstone beads • Tools needed are: • Round nose pliers, wire cutters chain nose pliers tools from @beadalon • 1. Pull the wire through the hole bend it so that one side is bent over the of the briolette. Bend the other side of the wire up, so that they cross each other just above the point of the briolette. You want a little bit of space between the crossed wire the top of the bead. • 2. Take your pliers bend the longer side of the wire straight over the top of the briolette stone. • 3. While holding the wire in the crossed area above the stone take your fingers take the tail wire twist it around the base of the longer wire 3 times. Cut off excess wire pinch close. • 4. Take your pliers bend the wire at the very top of the three coils in a 90° angle off to the side. • 5. Place your round nose pliers in the wire bend at the top of the three coils with your other hand take the wire and will put over the top of your round nose pliers forming a loop at the top of your stone. • 6. Using your pliers, hold the loop in place and take your hand and wire wrap the wire under the loop until it reaches your previous wire wrapped coils. Cut off excess wire and pinch close. • 7. You have now wire wrapped a briolette! • You can reach me at ⤵️ • Andria Bieber Designs • www.andriabieberdesigns.com • If you want to support my work not make a purchase, you can buy me a coffee. Thank you! Paypal.me/andriabieberdesigns or Venmo @andria-bieber • Let's visit some more on: • Facebook / andriabieberdesigns • Instagram at / andriabieberdesigns • Pinterest at https://www.pinterest.com/ • • Join this channel to get access to perks: • / @andriabieberdesigns
#############################
