Youtor
Laminating with Fiberglass amp Epoxy The Basics
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=0dtcN3CNJ8Y
Ideal for working on larger projects, a typical 'fiberglass layup' is a popular process for those who need a large, strong, and lightweight tool. • 00:00 - Introduction • 01:18 - Epoxy Surface Coats • 02:10 - The Almost Tack-Free State • 02:55 - Laying Up Fiberglass and Laminating Resin • 04:59 - Demolding • This is an updated version of the video originally entitled Introduction to Epoxy • Laminating Systems. We’ve gone back to increase the resolution, correct the color; plus update the graphics and add some clarifying content. • Freeman Mfg Supply is a materials supplier. The thousands of hours dedicated to producing this series was done in service to our industry. If you are looking for any of the materials shown, please visit us at http://freemansupply.com (our primary website for professionals) or http://miapoxy.com (curated for the DIY market). • Finally, this video was originally part of a compilation DVD entitled Making Parts, Patterns, Tools, Molds. You can see all of those videos (in sequence and in context) on our dedicated video website at https://www.FreemanVideos.com. Or check out our YouTube Playlists. Or find your next video of interest here: • Moldmaking Casting Videos: • 1 - Using Rigid Fast-Cast Urethanes for Casting Both Molds Parts • • Using Rigid Fast-Cast Urethanes for C... • 2 - Making Flexible Molds with Urethane Rubber • • Making Flexible Molds with Urethane R... • 3 - Simple Silicone Rubber Molds (Without a Parting Line) • • Simple Silicone Rubber Molds (Without... • 4 - Two-Part Silicone Rubber Molds (Forming a Straight Parting Line) • • Two-Part Silicone Rubber Molds (Formi... • 5 - Moldmaking With Clear Silicone Rubber • • Moldmaking With Clear Silicone Rubber • 6 - Making Molds Casting Thin Walled Parts ( Using Color Tints) • • Making Molds Casting Thin Walled Pa... • 7 - Making Two-Part Silicone Rubber Molds with Complex Parting Lines • https://tinyurl.com/spf9z8hs • 8 - Tips Tricks for Moldmaking Casting Parts with Intricate Detail • • Tips Tricks for Moldmaking Castin... • 9 - Making Simple Multi-Cavity Molds • • Making Simple Multi-Cavity Molds • 10 - Surface Casting Method #1 (featuring Gap Wax) • • Surface Casting Method #1 (featuring ... • 11 - Surface Casting Method #2 (With Brushable Urethane Casting Resin) • • Surface Casting Method #2 (With Brush... • 12 - Using Fillers Pourable Foam to Lighten a Casting ( More) • https://tinyurl.com/2cav5em5 • • Laminate Toolmaking Composite Parts Videos: • 1 - Laminating with Fiberglass Epoxy - The Basics • • Laminating with Fiberglass Epoxy - ... • 2 - Building a Fiberglass Epoxy Laminate Mold • • Building a Fiberglass Epoxy Laminat... • 3 - Vacuum Bagging a Carbon Fiber/Composite Part • https://tinyurl.com/auf6d2d8 • 4 - Building a Laminate Tool with Epoxy Paste • • Building a Laminate Tool with Epoxy P... • 5 - Rapid Tool Making with the Repro Laminating System • • Rapid Tool Making with the Repro Lami... • 6 - Making a Simple Glove Mold • • Making a Simple Glove Mold • Preparing Models, Molds, Materials Videos: • 1 - Prevent Your Castings Models From Sticking to Your Molds • • Prevent Your Castings Models From S... • 2 - Weighing Mixing Resins Silicone Rubber The Right Way • • Weighing Mixing Resins Silicone R... • 3 - Eliminate Entrapped Air in Molds Castings • • Eliminate Entrapped Air in Molds Ca... • 4 - How NOT to Ruin Silicone Rubber When Making Molds • https://tinyurl.com/32uwjv3z
#############################
