BenQ W6000 DLP Projector RepairCleaning Fan ErrorFan Lock Repair

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=0zOMbkPNrcE

This BenQ W6000 was sent in with a fan warning/fan lock error. Upon further diagnosis, I found that an old lamp assembly had burst and showered the inside with quartz glass bits. This is a common issue with many projectors. The piece of glass found its way down the air vent into the back of the lamp blower fan. Since these fans are low torque, it jammed the fan. • See the bookmarks below to jump around in the video. I am going to try and add these to all videos in the future and at some point add it to past videos. Feel free to do it yourself and share. I would appreciate any help with that. • In shipping the glass came loose so it saved me a little troubleshooting, but when I initially put the fan back in, I tried to cheat and it bit me later with some vibration noises. • Focus/Zoom ring disassembly short: • BenQ W6000 Focus/Zoom Ring Removal • Replacement Projector Lamp 5J.J2605.001 Use Promo Code YT50 for 5% off: https://www.purelandsupply.com/5jj260... • 00:00 words • 01:35 Focus/Zoom Ring Removal • 16:00 Blower Fan Removal • 38:00 Lamp Assembly Install • 58:40 Focus/Zoom Ring Install • 01:02:00 Fan Noise Requiring Teardown Again • 01:03:00 Full Teardown with Screw Type/Location • 01:12:30 Re-evaluation of Blower Fan with Proper Reinstallation. • 01:42:28 Final Testing

#############################

New on site