ProLux Tutorial Handsender EasyTrend auf Empfänger einlernen

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=1JsNNW3zmQM

Teach-in the handheld transmitter to the existing radio receiver: • 0:02 Disconnect the power supply to the receiver so that it is de-energized (here, for example, by removing the central plug). • 0:08 Remove the circuit board from the housing by unscrewing the two screws. • 0:21 Press and hold the blue key for teach-in. Connect the power supply (here in the example the central plug) to the receiver. The green LED starts flashing and becomes faster after approx. 3 - 4 seconds. Then release the blue button. • 0:34 Now press any three buttons on the handheld transmitter simultaneously within 15 seconds. The green LED on the receiver goes out. • 0:41 Perform a test of the functions. • 0:50 After a successful test, slide the circuit board into the receiver housing. Ensure that the circuit board is correctly seated in the guide rails. Screw the housing back together.

#############################

New on site