M8 external breather mod Softail street bob

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=23XS_5f_t_o

Quick video upgrading the screaming eagle ventilator to the screaming eagle extreme flow ventilator air cleaner. Also a video on doing an extrenal breather mod on a Harley Davidson. • #thegingybeardman • I used the following: • Mackay emissions control vacuum hose - 6mm (1/4 inch) inner diameter, this is the house which goes onto the breather bolts. • 3/8 inner diameter rubber grommets ×2 • These were used when i drilled holes in the air cleaner backing plate. • 1/4 X 3/8 X 1/4 Tee 3-Way Hose Barb Brass Fitting Fuel Connector, this is the fitting where the 2 hoses join into one. • 3/8 inner diameter fuel hose approx 1 meter in length cut to size, this is the hose which runs between the t conneconnconnepod filter. • 1x DK customs catch can. • 1x CNC Rear Brake Fluid Tank Reservoir. I purchased this to use the bracket it comes with to hold the catch can. Still waiting on it in the mail here's a link • https://www.ebay.com.au/itm/264546953994 • I also used two hose clamps which span from 6mm to 16mm and about 6 zipties

#############################

New on site