How To Read from ESP32 CLONEBACKUP Everything

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=2GwzbBn7uRw

This was kind of a fun one that you might find useful someday like I did. • Esptool git reference: https://github.com/espressif/esptool • Flash chip datasheets: https://www.winbond.com/hq/product/co... • Here's all of those commands you can use as a starting point and note that on windows, things will be slightly different. Just follow the same steps and you should be good: • Read from Adafruit Huzzah board (4MB): • /Users/kevindarrah/Library/Arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool.py --port /dev/cu.usbserial-01D5ECE0 --baud 921600 read_flash 0 0x400000 adafruit.bin • Write back to Adafruit Huzzah: • /Users/kevindarrah/Library/Arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool.py --chip esp32 --port /dev/cu.usbserial-01D5ECE0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x0 /Users/kevindarrah/adafruit.bin • Get Flash ID for size: • /Users/kevindarrah/Library/Arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool.py --port /dev/cu.usbserial-DA00Y7QG --baud 921600 flash_id • Read trigBoard (16MB): • /Users/kevindarrah/Library/Arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool.py --port /dev/cu.usbserial-DA00Y7QG --baud 230400 read_flash 0 0x1000000 trigBoardbackup.bin • Write trigBoard: • /Users/kevindarrah/Library/Arduino15/packages/esp32/tools/esptool_py/2.6.1/esptool.py --chip esp32 --port /dev/cu.usbserial-DA00Y7QG --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x0 /Users/kevindarrah/trigBoardbackup.bin • Tindie link to trigBoard: https://www.tindie.com/products/kdcir... • Thanks to all the Patrons for dropping a few bucks in the tip jar to help make these videos happen! • / kdarrah • Twitter: / kdcircuits • For inquiries or design services: • https://www.kdcircuits.com

#############################

New on site