Youtor
Using LaserWeb with the LaserPecker L1L1Pro
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=2I_ziR_dfAc
This is a demo which shows you how to set up the free LaserWeb software (https://github.com/LaserWeb/LaserWeb4...) for use with the LaserPecker L1/L1Pro engravers. • This demo walks you through setting up LaserWeb, creating a gcode file, using dropbox to transfer it to your iphone, then transfer it from dropbox to the correct folder on your iphone so you can load it in the LaserPecker App. • Here's an index: • 00:00 Configure Laserweb with the following setup: • Settings----Machine: • Dimensions 100x100 • Origin Offsets (important!) X: -50, Y: -50 • Tool head: 0.15 (if L1Pro, 0.3 otherwise) • Settings----GCODE : • GCODE Generator: Marlin • GCODE START: • M05 S0 • G90 • G21 • G1 F2000 • G4 P0 • GCODE END: • M05 S0 • G1 F2000 • G1 X0 Y0 • TOOL ON: • G4 P0 • M03 • TOOL OFF: • G4 P0 • M05 S0 • G1 F2000 • LASER INTENSITY: S • (save the profile) • 05:37 Load a document into LaserWeb, set parameters, save gcode file • 12:12 Open up the gcode file in notepad. Replace G0 with G1 (IMPORTANT!) • 13:00 Upload gcode file to dropbox for transfer to your iphone • 13:56 Download file from dropbox, save in the correct folder on your iphone to have it show up in the LaserPecker Application • 15:00 Load the gcode file into LaserPecker and etch! • I hope this helps! • Dave
#############################
