Everything you need to know about cylinder head installation

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=2_UPiCmE7iA

The cylinder head is one of the main parts of the car engine and it is placed in the upper part of the engine where the valve set and manifolds are assembled on this part. • If the cylinder head is overheated (which depends entirely on the quality of the cylinder head and its ingredients), it is said that the cylinder head is burnt. In fact, the same twisting and deformation due to excessive heat is called burning, which makes it necessary to replace the cylinder head. • According to the laws of physics, heat flow usually moves upwards. Since the combustion chamber of the engine (the hottest part of the engine) is located inside the cylinder head, this part must be able to withstand a lot of heat during operation. If you don't follow the order of tightening the bolts when opening and closing the cylinder head and overtighten them, if you open the cylinder head bolts while the engine is hot and again if you force the car all the time. You have to wait until your car's cylinder head is bent and practically useless. • Also, water and oil flow paths are installed in the cylinder head so that the heat can be controlled and the required oil can be sent to the valves and tools that need lubrication. • _______________________________ • #customerstates #automechanic #automechanic #carmechanic #customerservice #customerstates #mechanic #mechanical #car #carrepair #mechanicproblems #automobile #truck #trucks #automobiles

#############################

New on site