Youtor
Introduction to Fluke 190 Series II ScopeMeter® Portable Oscilloscopes
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=2wco5uEemtY
http://bit.ly/2RQHb1x • In this video, get an in-depth overview of the Fluke 190 Series II ScopeMeter® Portable Oscilloscopes and its useful features. • ScopeMeter® Portable Oscilloscopes take you into territory that standard bench oscilloscopes cant readily withstand, harsh, hazardous and dirty industrial environments. These hand-held instruments combine the performance of a bench oscilloscope with a multimeter and paperless recorder for installing, commissioning and maintaining industrial and electronic equipment out in the field. Fluke ScopeMeter test tools use a unique Connect-and-View™ mode to automatically and continuously setup the oscilloscope making them easy to use even on complex signals. • Fluke offers handheld oscilloscopes with bandwidths as higher as 500 MHz. Faster sample rates and higher bandwidth means greater accuracy and clarity. The scope will capture and display unknown waveform shapes, amplitudes and any disturbances. In order to display at least the fifth harmonic component of a signal, a good rule of thumb is to select a scope with a bandwidth of at least five times the maximum clock rate of the device under test. The faster the sample interval, the more accurate and detailed the scope will display a signal edge (dV/dt) and peaks of any reflections or transients. • The Fluke ScopeMeter 190 Series II combines the highest safety ratings and rugged portability with the high performance of a bench oscilloscope. Designed for plant maintenance engineers and technicians, these tough ScopeMeter test tools go into harsh, dirty, and hazardous industrial conditions to test everything from microelectronics to power electronics applications. • Some key features include: • • Four meter measurements via scope BNC inputs in four-channel models • • Connect-and-View™ continuous auto-trigger, single shot, pulse width, and video triggering • • ScopeRecord roll mode, capture waveform sample data for up to 48 hours • • TrendPlot, trend measurement readings for up to 22 days • • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s) • • IP-51 rated for dust and drip proof to withstand harsh environments • For more information about Fluke 190 Series II ScopeMeter® Portable Oscilloscopes, visit the Fluke website here: http://bit.ly/2RQHb1x
#############################
