Youtor
Making a Soap Cutter
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3CLp0_jueq8
I Make a Soap Cutter for @ezervanna. The soap cutter is designed to cut large 600 x 400mm blocks of soap into smaller pieces. The cutter is made from plywood and uses 700mm full extension ball bearing drawer slides, guitar wire and guitar tuning pegs. • / wrkshop71 • / ezervanna • To access the free project tutorial for this project and others from my Channel. Visit the link below: • https://wrkshop71.com/project-tutorials/ • • Materials list • --------------------- • 18mm Laminated birch plywood: • 2 pcs 250mm x 230mm • 1 pce 552mm x 135mm • 1 pce 414mm x 50mm • 15mm Plain birch plywood: • 1 pce 552mm x 55mm • 1 pce 900mm x 516mm • 2 pcs 725mm x 50mm • 1 pce 750mm x 513mm • 1 pce 600mm x 30mm • 1 pce 414mm x 35mm • 2 pcs 640mm x 50mm • 1 pce 554mm x 250mm • 2 pcs Ball bearing Draw slides 700mm full extension sliders. • 1 pce of 7mm nylon cutting board 380mm x 25mm (The thickness can vary depending on what is available in your location) • 4 pcs Electric Guitar tuners (These are just generic tuners I bought off aliexpress) • 4 steel electric guitar strings PL016 or PL018 which are 0.016 inches and 0.018 inches in diameter which in mm is 0.41 and 0.45 respectively.
#############################
