Youtor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3EeEQLZgEVQ
In this video I have taken apart a disposable vaporizer pen in order to show its internal parts. Some vaporizer pens might be constructed differently. Name of the manufacturer is unknown. I feel most are designed in a similar fashion. Also there are a few tips on how to ensure your disposable vape pen doesn't get clogged. • See how to take apart in this link: • • How to take apart disposable vape pen • I made a mistake in the video and called the rosin by the wrong thing and called it resin by mistake. Just know the two are different. Resin is residual build-up and rosin is the smokable product. • In order to take apart the vape pen I pretty much had to sever the connections so be weary if you try to take yours apart you will probably do the same thing. • Getting the chamber out was difficult to do on this one. • It would appear as if the clog happens where the rosin gets burned. Every haul creates a little more resin gum that seems to fill the air cavity. Some rosins are thicker than others too contributing to clogs. Warming it up a bit (holding it against a hot air vent, hair dryer what have you) it will loosen up the resin and rosin enough for air passage. It does tend to cool down quickly when you haul and pass air through the unit again. Tends to want to seal back up. • It should go without saying but DO NOT put it in the microwave. • Careful not to let it get hot too hot as to possibly melt anything and cause damage. Do not leave directly on stove elements or allow heat source to make pen too hot to touch. If it's too hot to even touch then you have gone too far. Probably a decent rule of thumb. Don't want to be smoking plastic now. It sucks... Trust me😆 • Also • Check out my bros band. Like and support. He also runs audio production services. • • Kandy Face - Seven
#############################
