How do I clear the message quotPrint Unable ZCquoton Brother DCPL2540DW

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3bF02RyKcZA

The message Print Unable ZC indicates that the machine has detected an irregular power supply. This error could be the result of a problem with the machine, but it is much more likely that the error has occurred due to the operating environment. Usually, this error occurs because the machine is connected to a special power source such as a generator, uninterruptible power supply (UPS/battery back-up) or power inverter.2. Do you use a special power source such as a generator, uninterruptible power supply (UPS/battery back-up) or power inverter?- If you do not use a special power source, go to STEP 3.- If you do use a special power source, go to STEP 4.3. Is the machine's AC cord plugged into a surge protector, power strip or other device?- If the machine's AC cord is plugged into another device, go to STEP 4.- If the machine is plugged directly into a standard wall outlet, go to STEP 6.4. Power off the machine by pressing and holding the On/Off button on the machine panel.5. After the machine has powered off completely, unplug the machine's AC cord from the power device and then plug the cord directly into a standard AC wall outlet. Go to STEP 7.6. Power off the machine by pressing and holding the On/Off button on the machine panel. After the machine has been powered off for approximately 10 seconds, go to STEP 7.7. Power on the machine by pressing the On/Off button on the machine panel.What causes Brother printer error “Print Unable ZC”?1. Put a filter into the power supplySince this issue is related to an irregular power supply, think of a way to get the noise out of it. For newbies, power-supply noise is a combination of unwanted periodic ripple and spikes with random noise from the devices or other external sources.You could, therefore, use a noise filter on the power supply, just like you use filters to remove noise from a signal. To be more precise, a filter consisting of L2 and C3 is an ideal choice. The output voltage of the power supply is being then filtered by the LC filter.High-frequency noise coming from both the switching frequency and the switching transition frequency is finally attenuated.2. Install a voltage stabilizer to the power supply unitAs a final resort when there is an irregular power supply issue causing the Print Unable ZC message error, you could try to install a voltage stabilizer to the power supply unit.AdThere are various types of voltage stabilizers that successfully keep the voltage of a circuit at a specified level, yet keep in mind that integrated circuit voltage stabilizers are among the most reliable choices.Let us know in the comments section whether these steps and solutions worked for you. If nothing works, you can contact your printer’s manufacturer to find out more about how to resolve the issue. • • • यदि तपाईं यस च्यानलमा नयाँ हुनुहुन्छ भने कृपया च्यानललाई सब्सक्राइब गर्दिनुहोला र छेउमा आउने घन्टीलाई दबाई All मा छान्नुहोला यस्तै यस्तै भिडियोहरु हेर्नको लागी सब्सक्राइब गर्दिनुहोला • भिडियो मन परे लाईक कमेन्ट सेर पनि गर्दिनुहोला। धन्यवाद • नोट:- यस च्यानलमा अपलोड गरेको भिडियो डाउलोड गरि आफ्नो च्यानलमा अपलोड गरेको पाएमा • प्रचलित कानुन बमोजिम कारबाही गराइने छ। • Note: - If a video uploaded to this channel is downloaded and uploaded to your channel • Action will be taken in accordance with existing laws. • Welcome to my channel Technical Jasis,This channel is about how fix printers ,HP ,samsung , Canon,Epson,Sharp,Toshiba,Richo,Brother,Kyocera ,Xerox,Lexmark,Konica and Konica-Minolta printer • This channel have videos about Knowledge ,Technology ,Repair printer ,Fix printer Error ,and change other for printer ....... • Thank you for all your visited on channel Technical Jasis • • Facebook Page : / acomleteitsolution • Twitter : / jasispana • My New Channel : / @exporttech990 • My youtube Channel: / @technicaljasis

#############################

New on site