Moon Lithophane Lamp 3D Printed on my CR10S

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3i6UzTQTSZU

https://3dp.rocks/lithophane/ • Settings used for Outer Curve lithophane. • Model Settings: • Maximum Size - 150mm • Thickness - 2mm • Border - 4mm • Thinnest Layer - 0.8mm • Vectors Per Pixel - 10 • Base/Stand Depth - 0 • Curve - 0 • Image Settings: • Positive Image • Mirror Image Off • Flip Image Off • Manual Refresh • Repeat X Count: 1 • Repeat Y Count: 1 • Mirror Repeat Off • Flip Repeat Off • Image preparation: • Crop your image to 2:3 (ratio) • Save image as .jpg less than 1mbs • Slicing settings for PolyTerra™ PLA Cotton White (Start with generic PLA settings): • Printing Temp: 225°C • Bwd Temp: 60°C • Extrusion Multiplier - 0.9 (90%) • Extrusion Width - 0.4 • Shells/Perimeters - 3 • Infill - 0% • Layer Height - 0.15mm • Allow single extrusion fill - (Internal 20%) • To purchase light, email: [email protected] • Kenwell Lighting, Model: 35954 • Price: €9 (+ Shipping from the Netherlands) • .STL Files for Lightbox: • https://www.thingiverse.com/thing:488... • PolyTerra™ PLA: • https://polymaker.com/polyterra-pla-i... • .STEP Files for Lightbox: • https://www.dropbox.com/s/7s10dqgz8ys...

#############################

New on site