Designing a DIY synth arpeggiator with logic gates Part 2

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3k53J40eEy0

Support the channel: / moritzklein • A detailed look at how to build a scaled CV arpeggiator with a multiplying digital-to-analog converter and a few logic gates. It can be used with any volt/octave analog synthesizer. In this second part, I'm building the actual DIY bit processor. • • Here's another rough bill of materials: • 1x 40106 Hex Inverter • 2x 4081 Quad AND Gate • 1x 4070 Quad XOR Gate • 2x Small Signal Diode • 6x LED • 6x 2K Resistor • Lots of wire • • Any questions – feel free to ask them in the comments. I'm happy to help.

#############################

New on site