How to CNC – Facing Material for Machining CNC Othermill Fusion360

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3kFeurVuuOk

In this tutorial we'll learn how to face material for machining using an Othermill desktop CNC and Fusion 360. Facing material is the procedure in which the top surface of raw stock is removed to make it even and leveled. • Othermill desktop CNC • https://www.adafruit.com/products/2323 • Nitto Tape • https://othermachine.co/store/fixturi... • Wood Feeds and Speeds • https://othermachine.co/support/mater... • ----------------------------------------- • Visit the Adafruit shop online - http://www.adafruit.com • Subscribe to Adafruit on YouTube: http://adafru.it/subscribe • Join our weekly Show Tell on G+ Hangouts On Air: http://adafru.it/showtell • Watch our latest project videos: http://adafru.it/latest • New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ • Music by bartlebeats: / bartlebeats • -----------------------------------------

#############################

New on site