Shrike Full Build Log Video

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=3wKF_5SpWaY

Timestamps: • 00:00 - Component information • 03:04 - Arm Building • 09:22 - XT60 Soldering • 22:04 - Motor wire soldering/cutting • 43:35 - ESC power wires • 01:08:25 - KISS FC Wiring (#1) • 02:06:38 - Faulty KISS FC • 02:36:17 - KISS FC Wiring (#2) • 03:18:40 - Receiver wiring • 03:36:00 - 3d printed top plate wiring/prep • 03:37:40 - HS1177 Mounting • 03:47:47 - FX799T Mounting • 03:51:30 - Antenna mounting • 04:05:30 - 12v regulator wiring for VTX camera harness • 04:43:14 - Top Plate mounting • • HQProp - http://hqprop.com • Full blog post here: http://blog.matthew-evans.info/2016/0... • Here's my Shrike build video. Apologies in advance for the less than optimal lighting, but hopefully it's good enough to see what is going on. I learnt a LOT filming this, if and when I do another video build log it will be 10x better. There are some annoying habits I seem to have and the camera angle isn't great either. Hopefully the quality is OK, being 1080p60fps with not much action going on, everything should be crystal clear at least. • It wouldn't be a build video without some failures on the way, so expect a few of those. Hope it helps some building their quads, whether it's a Shrike or otherwise. • Specs: • X-Labs Shrike • Emax RS2205 2300kv RedBottom • KISS 24A RE ESC • KISS FC • X4R-SB Receiver • HS1177 with 2.1mm lens • FX799T 200mW • TBS Triumph FPV Antennas • Custom GoPro 3d Printed top plate; http://www.thingiverse.com/thing:1242579 (still a work in progress, nearly perfect) • Things for next time: • better lighting • better angle • better quality • better mic • less mumbling • FASTER build xD • Thanks for watching, hope it was useful!

#############################

New on site