Unequal Flange I Beam Torsion open section nonuniform thickness

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=40TlLcO9Sp4

Here an open section with non-uniform thickness and non-continuous median lines is analyzed to determine the maximum permissible torque it may withstand, applying a factor of safety. Under this torque, the angle of twist per unit length is found, as well as the absolute angle of twist and torsional springrate, assuming the length of the member is known. These analytical steps were applied to a standard unequal flange I beam cross-section that was looked up out of tabular data. • Playlist for MEEN361 (Advanced Mechanics of Materials): • • MEEN 361: Advanced Mechanics of Mater... • Playlist for MEEN462 (Machine Element Design): • • MEEN 462: Machine Element Design • This example was recorded on January 21, 2018. All retainable rights are claimed by Michael Swanbom. • Please subscribe to my Youtube channel and follow me on Twitter: @TheBom_PE • Thank you for your support!

#############################

New on site