How To Program ESP8266 With Arduino IDE

YOUR LINK HERE:

http://youtube.com/watch?v=48JUh8Vlea4

ESP8266 module can be used standalone. In this video I show how to program/flash ESP8266 with arduino IDE • ESP8266 modules, like ESP-01, ESP-03, ESP-12 and such are really cheap board with a microcontroller that has built-in WiFi. In this video I show how to program/flash the ESP8266 WiFi-module using modified Arduino IDE. • Updated: You don't need to download modified Arduino IDE anymore, if you can use official Arduino IDE version 1.6.4 (or later). Here is a video tutorial from My Electronics Lab -channel: • ESP8266 Library For Arduino IDE - Ins... • Following link still has instructions on how to install esp8266 platform packages to Arduino IDE: • https://github.com/esp8266/Arduino • Here is simple schematic for those who don't know how to put ESP8266 module, similar to one in the video, to firmware update mode (mode where you can upload the sketch): • http://i.imgur.com/R6Afzju.png • Push SW1-button down and while keeping it down, push SW2 and then release it. After releasing SW2 you can release the SW1 aswell. • There are other modules available and they have different pinouts. Here is list of pins you'll need to connect: • GPIO15 (if available) pulled low, GPIO2 pulled high, CH_PD pulled high and for accessing bootloader pull GPIO0 Low while resetting/powering up the module. • • Obviously I ment to say $4 Arduino compatible WIFI-microcontroller in the end... • If you liked the video, please show it and hit the Like-button! • Check out my other videos: • / hugatry • Subscribe: • https://www.youtube.com/user/hugatry?...

#############################

New on site