Top 5 Black Romance Movies

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=4GMTWPz8Y3g

The Passage Shower Base by American Standard provides sturdy construction and elegant design for an easy upgrade to your shower. • • For steps on how to install the shower base, follow these instructions: • • Step 1: Ensure the floor stud walls are square and plumb on a level floor. • • Step 2: Provide a 5x5” opening in the floor for the drain. Refer to the product rough-in for drain location. • • You must purchase a standard round shower strainer-type drain. • • Step 3: Remove the strainer from the drain and cut the waste pipe height so the drain body is snug in the shower base. • • Step 4: Apply silicone sealant between the drain body and the base. • • Step 5: Dry fit the base to the floor. Check the floor for level and adjust if necessary. • • Step 6: Mark studs at the tile flange for reference. • • Step 7: Remove the base and apply a non-shrinking bedding material such as mortar. Apply and spread enough bedding material to support the bottom. • • Do NOT use the base flange to support the shower base. • • Step 8: Lower the base into position with the drain assembly into the waste pipe. Rock the base so the top of the tile flange aligns with the reference lines on studs. • • Step 9: Make sure the base flange is contacting rough floor along the entire length. Ensure the bases is level in two directions. • • Step 10: Allow the bedding material to completely harden before applying any weight. • • Step 11: Replace the drain strainer and tape over the shower drain to protect finish and block drain from construction debris. • VIEW THE FULL PASSAGE COLLECTION: https://www.americanstandard-us.com/b...

#############################

New on site