BUILD GUIDE Herja

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=4UC2KTtKURc

This is the complete build tutorial for Herja, our mountable short dart side-along flywheeler blaster. Like its Norse namesake, she devastates in close-quarters gameplay. We'll have a full launch video published soon, but we thought we should make the build guide available sooner for those who purchased a DIY kit from us. • As always, we try our best to be as clear and consise as possible. If you have any questions on this build or suggestions on how to make future tutorials even better, don't hesitate to contact us: • [email protected] • Want to build one for yourself or have us build it for you? It's your choice! Find both listings with the link below: • https://outofdarts.com/collections/herja • Do you like written instructions more than video? We'll have a full write up on our blog in just a few days! • https://outofdarts.com/blogs/news • FAQ Corrections: • -If you have any questions about products we sell on the shop, don't hesitate to shoot us an email: [email protected] • - • Chapter Timecode will be completed by 12 PM tomorrow morning! • 0:00 Opening • 0:36 LiPo Safety Brief • 1:09 Included in the Kit • 2:10 Tools Supplies Required • 3:31 Let's Get Going! - Installing the Square Nuts Detents • 7:13 Installing the Motors Flywheels • 9:20 Wiring the Master On/Off • 10:02 Assembling the Pusher Mechanism • 13:20 Wiring the N20 Pusher Motor • 14:16 Assembling the Internal Switch Mechanism • 15:58 Wiring the Flywheel Motors • 17:08 Installing the Flywheel Cage • 17:41 Wiring the Master On/Off (cont) • 18:35 Wiring the Internal Switch • 20:10 Wiring the N20 Pusher Circuit • 20:50 Wiring the XT-30 Battery Connector • 23:03 Wiring the N20 Pusher Circuit (cont) • 23:29 Wiring the Internal Switch (cont) • 24:59 Wiring Installing the XT-30 External Switch Connector • 27:50 Final Blaster Assembly • 28:40 Assembling the Rail Receiver • 29:51 Installing the Rail Receiver • 31:17 Installing the Picatinny Rail • 32:06 Wiring Assembling the External Switch • 34:07 Installing the Battery Initial Testing • 35:36 Test Firing the Blaster • 36:14Closing Remarks • Out of Darts, run by Luke, is a one-stop nerf-modding hobby shop. We carry all the supplies, tools, and accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 Prusa printers. Check out our site below for guides, build lists, and resources. • Please subscribe for more! • http://tinyurl.com/jnuot5d • My web store: • https://www.outofdarts.com • Product questions? • [email protected] • Follow me on Instagram for sneak peeks: • / outofdarts • Edited by J Perry Heun, Out of Darts Media Producer

#############################

New on site