WCFab Traction Bar Kits Lasting Driveline Protection

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=4xExC6pm4cw

Traction bars are a necessary upgrade when increasing the horsepower on your diesel truck to prevent the axle from twisting which can lead to broken u-joints, driveshafts, and even twisted axle housings. Our traction bar brackets bolt on to the bottom of the axle tube via the axle u-bolts and weld to the frame on the front end. We use a high-quality RockJock rebuild-able and grease-able “Johnny Joint” connection at the frame to allow for adjustment of torsion on the axle or if you raise/lower the rear of your truck. At the axle connection, we use a heavy duty Poly Urethane Bushing for decreased noise and vibration which is a common complaint if a solid heim is used on both ends. Grade 8 hardware connects the bars to the mounts on the frame and axle. We complete our traction bar kit with our professional in house powder coat process in your color choice and comes standard with a epoxy Primer base coat before the final color which increases corrosion resistance by more than ten times compared to just your standard powder single coat application. • Shop Traction Bars: • https://www.wcfab.com/search.html?q=t... • Give us a call: • 630-277-8239 • To learn more visit our website: • WCFab.com • Like us on Facebook: • / wehrlicustom. . • Follow us on Instagram: • / wehrlicusto. . • #WCFab #wehrlicustomfabrication

#############################

New on site