Youtor
DTC Ford B130F14 Short Explanation
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=4zzMFQVNRm0
The video focuses on the basic Ford specific diagnostic error code. • Contents: • 0:21 Basic DTC analysis according to OBD2 protocol standard. • 1:48 Insight into programming • an explanation of what a bit is and how a byte is formed • decoding the Error Code to the base programming • 2:58 A diagnostically understandable description of the Diagnostic Trouble Code • 3:05 Basic error definition • Possible causes or errors of the car and its parts describing the mentioned error • • We will continue to work on improving the content. • Our efforts at Maxidot s.r.o.the video content gets better. • • #maxidot #dtc #howto #diagnostictroublecode #ford • • • • • Make: • Ford • Code: • B130F 14 • Definition: • Lost Communication With Steering Angle Sensor Module • Description: • Key on for 800ms,and the DME detected that it has lost communication with the Steering Angle Sensor during its initial startup for 40ms (2 message cycles).The Engine Control Module (DME) communicates with all databus-capable control modules via a CAN da • Cause: • DME has failedTerminal resistance for CAN-bus are faultyCan data bus wires have short circuited to each otherThe steering angle sensor module is faulty • Failure Type: • Circuit Short To Ground or Open • This sub type is used for failures, where the condition detected by the control module is the same for either indicated failure mode.
#############################
