Youtor
Wire EDM
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=5AfgQVaJwbQ
https://marshallmfg.com/videos/index.... • Wire EDM - Electrical Discharge Machining • Looking into the CNC Wire EDM submersion tank from above, we see a fixture holding 15 parts. • The wire shown here, cuts the parts using an electrical current. Prior to cutting a slot into the part, the tank is filled with deionized water. • The wire never actually touches the parts. The wire throws off a current, and burns away the part before it can touch it. There is about a one-thousandth of an inch gap between the wire, and the path it’s burning. • When the cutting is completed, the parts are taken out of the tank. • This shows the path of parts that have already gone through the EDM process. • This is an example of a part that has an EDM L-Slot burned into it. • The slot dimensions are then checked on an optical comparator.
#############################
