FreeCAD Tutorial Path Module Geometry setup PART 1

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=5Lj4wEmdOwQ

In part 1 of this FreeCAD path module tutorial, I'll be showing you how to set up your parts for 3 axis CNC milling. Below you'll find the tooling information as well as a link to GrabCAD where you'll be able to download the model and follow along! • GrabCAD model: https://grabcad.com/library/freecad-p... • (T1 10MM END MILL) • Horiz. Feed: 29mm/s • Vert. Feed: 16mm/s • Spindle: 9549 RPM (forward) • Type: END MILL • Material: Carbide • Length offset: 150mm • H: 30mm • • (T2 5MM BALL MILL) • Horiz. Feed: 18mm/s • Vert. Feed: 16mm/s • Spindle: 10000 RPM (forward) • Type: BALL END MILL • Material: Carbide • Length offset: 150mm • H: 30mm • • (T3 10MM SPOT DRILL) • Horiz. Feed: 5mm/s • Vert. Feed: 16mm/s • Spindle: 2600 RPM (forward) • Type: Drill • Material: HighSpeedSteel • Length offset: 150mm • H: 35mm • a: 90 degrees • • (T4 6MM HSS DRILL) • Horiz. Feed: 10mm/s • Vert. Feed: 16mm/s • Spindle: 3183 RPM (forward) • Type: Drill • Material: HighSpeedSteel • Length offset: 150mm • H: 80mm • a: 118 degrees • • (T5 6MM 1.5R BULL MILL) • Horiz. Feed: 18mm/s • Vert. Feed: 16mm/s • Spindle: 10000 RPM (forward) • Type: END MILL • Material: Carbide • Length offset: 150mm • H: 20mm • • (T6 8MM CHAMFER MILL) • Horiz. Feed: 10mm/s • Vert. Feed: 16mm/s • Spindle: 5500 RPM forward • Type: ChamferMill • Material: Carbide • Length offset: 150mm • H: 30mm • Point/tip angle: 90 degrees • • If you liked the video give it a thumbs up, if you disliked the video give it a thumbs down. And remember to comment in the comment section, it lets me know if what I'm doing is helpful! :) • Have an awesome rest of your weekend, and I'll see you in the next video! :) • FreeCAD version: 0.18.4

#############################

New on site