Youtor
Photo engraving on plywood with a Wattsan CO2 laser engraving machine
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=5O0AszO3kO0
In this video we tried to show how to engrave photo on plywood with a CO2 laser machine. If this video was helpful and you want more, don't forget to follow us and like our videos. • 📌Photo engraving on plywood • ✔️You need to prepare a photo, for this we use the PhotoGraV program. • ✔️You can also make similar results in any other photo editor such as Adobe Photoshope. • ✔️In the program parameters, select the engraving on wood and the displayed result. • ✔️Set the contrast parameters so that the displayed result meets your needs. • ✔️Then import the resulting photo into RDworks. • ✔️Set the engraving parameters, they depend on the power of your machine. • ✔️In this example we are using a RECI W2 90W tube. • ✔️Speed:, power: • ✔️Adjust the air setting within 0.5-1 atmospheres. • ✔️Adjust the focal length. • ✔️Start the machine and observe the progress of the work. • ✔️Please note that the material must be burned through no more than 0.1-0.2 mm. • ✔️If the material burns through harder, turn down the power and increase the speed. • ✔️The photo is ready! • -------------------------------------------------- • To learn more how to choose a laser machine for your tasks or how to work with the other materials, please follow us. • If you need advice on laser or milling equipment, you can contact Wattsan. • ❗For any questions please feel free to contact our customer support. It is there for you 24/7: • +8613153105797 • [email protected] • -------------------------------------------------- • 📲 FOLLOW US • Facebook: / cncwattsan • Instagram: / wattsancnc • Pinterest: / wattsanlaser
#############################
