An NFC Card Reader for Home Assistant Automations

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=5Xo8yc4tQYc

I'll be building a standalone reader for scanning tags into Home Assistant and then using these tags as triggers for automations. Be sure to check the rest of the video description for more information, including parts used, links to wiring diagrams and more. • A written version of this project with diagrams can be found here: https://resinchemtech.blogspot.com/20... • Chapter Links: • ============= • 00:00 Introduction • 01:58 Parts Used • 06:00 PN532 Details • 07:02 Wiring and Connections • 08:00 ESPHome Code and Installation • 10:26 Breadboard Testing • 11:28 Assembled Version • 12:33 Scanning Cards in Home Assistant • 13:37 Creating Home Assistant Automations • 15:50 Final Testing and Demo • 17:01 WAF and Wrap-Up • • Parts Used/Shown: • ================ • PN532 NFC Card Reader Module: https://amzn.to/43ccRD1 • Wemos D1 Mini: https://amzn.to/3pwdvgE • Common Anode RGB LED: https://amzn.to/3JJi3qP • Vibrating Motor: https://amzn.to/3pqcua9 • ElectroCookie Prototype Board: https://amzn.to/3O07t1t • Resistor (220Ω - 10kΩ): https://amzn.to/44reHAM • 5V 2.5A USB Power Source: https://amzn.to/46z0QKr • Micro USB Cable: https://amzn.to/3PFjXMW • NFC Cards (or other NFC tags): https://amzn.to/46sj6Fz • 20 gauge solid wire: https://amzn.to/3NFS1WG • 24 gauge stranded wire: https://amzn.to/439hJIW • Straight pin headers: (for PN532): https://amzn.to/44w0bbc • Optional Items • Inkjet/LaserJet Labels: https://amzn.to/3CUjT4B • 1/2 Size Breadboard: https://amzn.to/3NYxe1S • Breadboard jumper set: https://amzn.to/43bBPlG • Dupont Jumpers: https://amzn.to/447Ba65 • Some of these links may be Amazon affiliate links. Use of these links will not affect your pricing, but this channel may earn a small commission if you make a purchase. • • Additional links and info: • ========================= • Enclosure 3D Design Files: https://www.thingiverse.com/thing:611... • Adonno's Original Project: https://github.com/adonno/tagreader • My ESPHome Code (gist): https://gist.github.com/Resinchem/f83... • If you'd like to help support this channel, or just say thanks, you can consider buying me a cup of coffee or two at: • https://www.buymeacoffee.com/resinche... • Special Thanks: • =============== • PN532 and NFC tags provided by subscriber @BELSERVICEMAN - Thanks Rich! • Shirt provided by: • Amtower's Collision Center • 11972 Fort Ashby Road • Keyser, WV • (304) 788-2995 • Tell Nick that Resinchem sent ya'! • #homeassistant #esphome #esp8266

#############################

New on site