Programming Electric Scooters for 10Setting Variants P0P9

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=5gNWZ9WOKtY

NEW 13 July 2019 Update • Full translation user guide here: • https://drive.google.com/open?id=1c0H... • The start of the video makes me look like I have the shakes, it's just a flaky camera! • This is a quick explanation of the 10 parameters available on most of the current Chinese scooters, especially the T11x range. • Care should be taken when changing any parameter and make a note of your existing settings. • P0 Wheel Motor Size for speedo calibration inches 0-99 (11) • P1 Low Voltage Cut-off 12.0-56.0 (520) • P2 Motor Pole Pairs 0-99 (16) • P3 LCD Display On/Off 0 or 1 (0) • P4 KPH or MPH 0 or 1 (1) • P5 Kickstart 0 or 1 (0) • P6 Cruise Control 0 or 1 (0) • P7 Power Start 0 or 1 (0) • P8 Power Level Dial Back 1-100 (100) • P9 Regenerative Braking 0,1 or 2 (1) • The P9 option is well worth investigating. You need to find the right balance here; if used in mode '2' you will lose the benefit of freewheel riding but gain battery trickle charging and if you ride in a very hilly environment, will save brake pad wear. But the electro-braking can snap in hard and unpredictably as soon as you release the throttle. If riding mostly on flat terrain, best to turn off completely. At the moment I use mode '1'. • Extra LCD Info: • TIME:Means Time from switching Scooter on • TRIP: Means single trip mileage (can be reset by holding MODE button) • ODO: Means accumulated mileage • DST: Means range of scooter in real time time with remaining battery • VOL: Means battery actual voltage • CH 2：00 : Means after 2 hours scooter will sleep if not used • Please share your thoughts...

#############################

New on site