Youtor
How To Install Threaded inserts
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=5zEDxz_LA-k
How To Install Threaded inserts • Stainless Steel Threaded Inserts made in Missouri • These can be used with all of these products; stoppers, openers, and can tab pulls. This is an original design from our manufacturer, they have a cap on the top so you don’t have to worry about glue getting into the threaded area. They are 5/8″ high with the 3/8″ x 16 tpi internal thread and use a 7/16″ drill bit. Always drill the hole 1/4″ – 3/16″ deeper to allow for air compression when installing the insert. The outer surface is rough and has ribs that will thread into the wood. *note: these inserts need to be glued in to prevent them from getting loose if the wood moves, which all wood will do. • Website • https://nilesbottlestoppers.com/ • #nilesbottlestoppers
#############################
