Onshape Sheet Metal Tutorial – THRU BRACKET

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=5zu924awAYI

23-10-01-THRU BRACKET Practice Models CHALLENGE VIDEO: • CAD Modeling Challenge - Onshape, Sol... • In today's #onshape #step-by-step #tutorial #tootalltoby shows us how to complete a #sheet #metal challenge by working from a #2d #drawing. • SolidWorks version of this tutorial: • • SolidWorks Sheet Metal Tutorial – THR... • 0:00 INTRO • 1:12 Start by PLANNING your 2D to 3D approach • 3:44 Create a new public document in onshape • 3:58 Sketch using Auto-Dimensions in Onshape • 44:31 Use the Onshape Sheet Metal Extrude command • 5:25 Customize the S key – add EDGE FLANGE • 7:21 Create an Onshape Layout Sketch for lower flanges • 7:59 Using the PARTIAL FLANGE option in Onshape sheet metal • 9:20 Create FLANGE using layout sketch • 9:47 Add Fillets and Hole to FLANGE • 10:25 Create the CENTER SLOT cut • 11:05 Chamfer, Fillet, Hole • 12:20 Mirror Onshape Sheet Metal Part • 12:43 Assign materials and check mass properties • 12:59 Conclusion

#############################

New on site