How To Sidechain Pro Q 3 in FL Studio 5 Minute Tutorial

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=6264GZzK25M

See written instructions below, and links to more resources concerning sidechaining in FL Studio 20 Fab Filter Pro Q 3. • Instructions: • 1. • Decide what you channel you want to preserve and which channel you want to compress away. Typically, you would want to preserve a Kick or Vocals, and compress away a Pad. When a sidechain is set up, the audio of the Preserved mix element (kick or vocal) makes the other element “duck” or compress away. The preserved mix element is called the “key.” The Key drives the compressor, which is applied on signal chain you want to duck. • • 2. • Insert an instance of Fab Filter Pro Q 3 on both the channel you wish to preserve/”the key”, and the channel you want “ducked.” • 3. • Select the channel you want to preserve, (typically Kick/Vocals) in the Mixer, (in our case, the Vocals) • 4. • then SHIFTCLICK (or rightclick, “Sidechain to this track”), the Send Switch of the channel you want to compress away/sidechain (typically the Pad), • 5. • then in the instance of Fab Filter Pro Q 3, inserted on the Pad, (or whatever you want compressed away/sidechained), go to FL’s VST Wrapper Settings -- and then the Processing Tab and activate (red button) and set the “Stereo Sidechain” target (in this case the Vocals (or Kick, etc) ). • 6. • then in Pro Q 3, Create a bell curve of the area you want compressed away on the Pad to make room for the vocal. • 7. • You make the dot compress away by using the Dynamic Range Ring, (the outer area of Gain knob). Click and drag downward to create downward compression. This makes the dot a Dynamic EQ. • 8. • Then select the External Sidechain button to the topright of the Gain knob to confirm, and you can chg from “Auto” to Threshold to fine tune the compression. (Note, there will be no External Sidechain button in versions of Pro Q 3 earlier than 2019.) • 9. • Also, you can see a heatmap/histogram of all the other instances of Pro Q 3 by clicking on the Analyzer button. (in our example, the Sidechain is our Vocal, and the instance of Pro Q (2) is our ducked Pad). You can doubleclick to rename the instances of Pro Q 3 for convenience. • Cheers. • • LINKS: • How To Sidechain with FabFilter Pro Q 3 - Resonance • • Video • External Sidechain Routing for Pro Q 3 - Plugin Boutique • https://www.pluginboutique.com/articl... • Fab Filter Pro-Q 3 EQ Tutorial - Everything You Need To Know - Sam Smyers (very helpful full tutorial on Pro Q 3) • • Fabfilter Pro-Q 3 EQ Tutorial - Every... • FL Studio Guru - Sidechaining (Official Sidechaining in FL tutorial) • • FLStudio Guru - Sidechaining • Image Line - Sidechain Compression (FL Studio Official) • https://www.image-line.com/fl-studio-...

#############################

New on site