Hanna GroLine HI9814 Handheld Combo Meter ECTDSpHTemp Setup and Calibration

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=6R_4XWEFpP4

See how to access and use the embedded menu, do standard (4.0/7.0 Solution Calibration), and quick calibration (recommended). • I've had my Blue Lab Truncheon for over ten years now and an Amazon pH pen for 2. Getting back into gardening indoors and tinkering with rockwool, I needed more accuracy and reliability. The GroLine HI9814 is the flagship combo meter from Hanna instruments GroLine and more than fits the bill. • The only downside to this meter is the embedded menu. You have to hold the Mode button for way longer than you think to get into the setup menu. Once you do though, you can change the Shut off time(8,60 or none), switch between 500 and 700 PPM scales (500 recommended for US, check with your nutrient manufacturer on their scale or just commit to using EC from the get-go), adjust the beep etc. • Sign up or shop over at: https://deeprootedhemp.com/collection... • for my favorite meters and to restock your solutions. Get on the email list for hemp info and product discounts and giveaways too. Check out the CBG and CBN blends while you're at it! • Music Credit: Ken Thomas Oatmeal Music!!!! • / @kenthomas8181 • From the manufacturer: • Features: • pH electrode – Preamplified for resistance to electrical noise including that generated by pumps and ballast • EC/TDS sensor – amperometric two pole design • Temperature – NTC sensor for accurate temperature measurement and compensation • 3 sensors in a single probe • Waterproof • Designed to withstand the humidity of a growing environment • Wide pH Range • pH range is from 0.00 to 14.00 pH • Selectable EC to TDS conversion factor • Choice of either a 0.5 or 0.7 conversion factor • 0.5 (500 CF) conversion factor is for an EC reading of 1000 μS/cm = 500 ppm • 0.7 (700 CF) conversion factor is for an EC reading of 1000 μS/cm = 700 ppm • Automatic Temperature Compensation • All readings are compensated for variations in temperature • Temperature displayed in C or F along with pH, EC or TDS reading • Stability indicator • The meter displays a clock tag that will disappear when the reading has achieved stability • HOLD button • Freezes reading on the display to allow recording of measurement • BEPS (Battery Error Prevention System) • Meter will automatically shut off if there is not enough power to get an accurate measurement • Battery % level at startup • Low Battery Indicator • When the level is below 5%, the battery symbol on the LCD blinks to indicate a low battery condition. • Auto-off • A selectable time before meter will automatically shut off to conserve battery life. Options are after 8 minutes, 60 minutes, or disabled. • Warranty: 2 years (probe 6 months)

#############################

New on site