Few people know this The biggest difference between TIG and laser

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=6fLQl3rf_N8

For information on welders and peripheral devices, please contact the manufacturer to receive a more accurate answer. • ↓↓↓↓↓↓↓ • [email protected] • Hello everyone. • Today's video talks about the differences between TIG welding and laser welding. • High output is required to achieve deep penetration under the same conditions. • So, how does the welding area change for the two welding methods as the output increases? • As you increase the output of the TIG welding machine, the penetration becomes deeper. • And because the “arc” is larger, the weld bead width also becomes wider. • Accordingly, the heat input area also becomes wider. • Even if deep penetration is achieved, it is not good for the heat input area to become wider. • Increasing the output of the laser welder deepens the penetration. • However, because the arc does not become larger, the weld bead width does not make much difference. • Since heat can be concentrated in a narrow area, it has the advantage of achieving deep penetration through a small heat input area. • As I've shown in other videos before, this is a huge advantage. • Of course, TIG welding would be more advantageous for welding wide widths. • Making good use of these characteristics will allow for more efficient welding work. • In the future, we will introduce situations in which these characteristics can be used. • Thanks for watching and have a nice week. • • • • • #laser • #vs • #TIG • #welding • #characteristics • #difference • #test • #factory • #machine • #steel • #crafts • #Tips • #secret • #trick • #amazing • #DIY • #idea • #future • #technology • #technique • #pipe • #HAGOJIBI • #video • #weldingmachine • #tigwelder • #Laserwelder • #laserweldingmachine

#############################

New on site