Nokia G240WF Router configurations with switch and cisco linksys E1200 fiber optic router config

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=6i5sM3A3OkE

Router configurations and show case with switch and NOKIA G 240w F fiber optic router • To get access to your Nokia G-240W-F ( also known as G-240W ), you need the IP of your device, the username and password. You'll find such information in the Manual of your Nokia G-240W-F router. But if you do not have the manual for your router or you do not want to read the whole manual to find the default login information then you can use the quick guide below. To get to the router login page it's necessary that you are connected to the router. • G-240W-B ONT Device Wifi and Network • Nokia G-240W-F Login Guide • Open your web browser (e.g. Chrome, Firefox, Opera or any other browser) • Type 192.168.1.254 (the default IP to access the admin interface) in the address bar of your internet browser to access the router's web-based user interface. • You should see 2 text fields where you can enter a username and a password. • The default username for your Nokia G-240W-F is userAdmin. • The default password is randomly generated. • Enter the username password, hit Enter and now you should see the control panel of your router. • Nokia G-240W-F router default login • You can try these username/password combinations below to get access to your wireless router. • Username Password • 1 admin • 2 useradmin • 3 userAdmin 'randomly generated' • 4 m1122 m1122 • 5 admin (blank) • 6 Telecom Telecom • 7 root rootme • 8 (blank) private • 9 *3001#12345# none • 10 nop 12345 • 11 (blank) 9999 • 12 useradmin (blank) • 13 private • 14 (blank) (blank) • 15 userAdmin randomly generated • Default login IPs for my Nokia router • You tried different router IPs but nothing worked? Did you try the following IPs? In the list below we listed all known router IPs for the manufacturer Nokia. Maybe this will work for you. • Default Router IP • 1 192.168.18.1 • 2 192.168.1.1 • 3 192.168.1.254 • 4 acquired via DHCP • 5 192.168.0.1 • Manuals for Nokia G-240W-F • last option: • All you need to do is to reset your modem. This can be done easily by clicking on the reset button at the back or at the bottom of your router. If you hold down this small button for approximately 20 seconds, (you may have to use a toothpick), then your modem will get restored to the factory settings. What you need to keep in mind is that when you reset your modem, you will lose your connection online. It is therefore better to take an expert's assistance in this regard. • G-240W-F router specifications (specs) System specsCPU: n/aRAM: 128 MiBFlash: 16 MiBCustom firmwares: None ConnectivityWiFi: 300mbps (bgn)WiFi bands: 2.4GHzWiFi throughput: n/aWAN: NoneETH: 4 x Gigabit portsUSB-ports: 0 Hard reset instructions for Nokia G-240W-FIf your G-240W-F router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Other scenarios where you might want to reset your router is if you've forgotten the password or misconfigured it and can't get access anymore.Your can reset your Nokia G-240W-F in the following way(s): The 30-30-30 resetThere are no specific instructions for this model yet, but you can always do the 30-30-30 reset as follows:When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp)While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 secondsWhile still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds.This process usually works for resetting any router to it's factory setting.Note: It is worth reading more about how to reset routers with the 30 30 30 reset and what the risks and considerations are when resetting your router this way, instead of just rebooting it. Default factory settings for Nokia G-240W-FIf you have performed a reset of your G-240W-F device or not changed the defaults, you should be able to access it with the following settings:Default Gateway IP: 192.168.1.254 Nokia login instructionsDefault username: userAdmin Nokia router default password listDefault password: ''randomly generated'' Default subnet mask: 255.255.255.0Default DNS server: 192.168.1.254Note: If you are using the default settings you should change them to increase security and prevent unathorized access to your network. How to login to the G-240W-FTo login to the 7368 Intelligent Services Access Manager ONT and change the settings, you can follow these steps:Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.Open your browser and visit http://192.168.1.254You should be prompted with a login dialogue.Enter the username: userAdmin and the password ''randomly generated''Note: If you have already changed the password use that instead.You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in.If these instructions don't work for your router • (Source: https://www.router-reset.com/info/Nok...)

#############################

New on site