Wiring Stack Light Best Practices

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=6mN8MuYIZxs

A stack light is a valuable tool for displaying the status of a machine or process. This is used to draw the operator's attention to the operation or condition of the machine. It is usually a vertical tower of colored lights programmed to turn on or off in various combinations to indicate different conditions. For example, a green light may indicate that a machine is operating, while a red light may indicate that it is not running. In addition to the lights, a stack light may include a horn or buzzer to provide audible feedback. • To use a stack light with a programmable logic controller (PLC), you need to wire it to the outputs of the PLC and program the controller to control the light. This article will discuss the five-step best practices for testing and wiring a stack light to a PLC and programming it for optimal performance. • Detailed information and links can be found on the corresponding post located here. • https://accautomation.ca/wiring-a-sta... • 00:00 Wiring a Stack Light to a PLC: Best Practices • 01:19 Step 1: Choose the Right Stack Light • 02:26 Step 2: Testing the Stack Light • 03:35 Step 3: Wire the Stack Light to the PLC • 04:38 Step 4: Test the PLC outputs to Control the Stack Light • 05:15 Step 5: Program the PLC to Control the Stack Light • PLC Beginner's Guide to PLC Programming • https://accautomation.ca/programming/... • Here are the controllers that we have covered at ACC Automation: • BRX Do-More Series (Do-More Designer Software + Simulator) • https://accautomation.ca/series/brx-d... • Productivity Series • https://accautomation.ca/series/produ... • https://accautomation.ca/series/produ... • Click PLC Series • https://accautomation.ca/series/click... • Omron CP1H Series • https://accautomation.ca/series/omron... • Horner XL4 PLC Series • https://accautomation.ca/series/horne... • https://accautomation.ca/series/easyp... • EasyPLC Software Suite is a complete PLC, HMI, and Machine Simulator Software package. See below to receive 10% off this software. This PLC learning package includes the following: • Easy PLC – PLC Simulation will allow Ladder, Grafcet, Logic Blocks, or Script programming. • HMI System – Easily create a visual human-machine interface (HMI) • Machine Simulator – A virtual 3D world with real-time graphics and physical properties. PLC programs can be tested using the EasyPLC or through other interfaces. (Modbus RTU, TCP, etc.) • Machine Simulator Lite – Designed to run on Android Devices. • Machine Simulator VR – Virtual Reality comes to life so you can test, train, or practice your PLC programming. • Purchase your copy of this learning package for less than USD 95 for a single computer install or less than USD 110 to allow different computers. • Receive 10% off the investment by typing in ACC in the comment section when you order. http://www.nirtec.com/index.php/purch... • Learn PLC programming the easy way. Invest in yourself today. • Regards, • Garry • ACC Automation • https://accautomation.ca/

#############################

New on site