Youtor
Configure the Network Activity in Packet Tracer
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=74ynEtX6HPA
In this CCNA Packet Tracer Activity you will configure the IP addressing on the PCs and then Telnet into the routers to provide the missing configurations in order to enable communication across the network. Everything you need is in the PT activity instructions. • The main tasks are: PC configuration of ip address, subnet mask, and default gateway, router interface configuration along with either a default route (R1 and R3), or two static network routes (R2). You will need to decide on an IP address range to assign to the blue network, as well as which IP addresses to configure on the router interfaces. • You can download the activity in Packet Tracer 7.2.2 here: https://drive.google.com/open?id=1FMZ... • You can download the activity in Packet Tracer 6.3 here: https://drive.google.com/open?id=1kvM...
#############################
