Oxyacetylene cutting flame produced by burning acetylene gas with oxygen to cut metals

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=7KksGs48qAw

Equipment • Oxygen and Acetylene Tanks: These contain pure oxygen and acetylene gas, respectively. • Regulators: Adjust the pressure of the gases before they reach the torch. • Cutting Torch: Mixes the gases and allows them to be ignited to create a high-temperature flame. • Cutting Tip: A specialized nozzle that focuses the flame and introduces additional oxygen for cutting. • Process • Setup: The torch is connected to the gas tanks, and the cutting tip is chosen based on the thickness of the metal being cut. • Ignition: Acetylene is ignited first, followed by introducing oxygen to create a neutral flame (not too oxidizing or carburizing). • Preheating: The flame is used to preheat the metal to its ignition temperature (usually around 1,600°C or 2,912°F). • Cutting: Once the metal reaches the necessary temperature, a lever on the torch is pressed to introduce a jet of pure oxygen. This increases the temperature further and oxidizes the metal, causing it to melt and blow away, creating a cut. • Movement: The torch is moved along the desired cut line, with a steady speed for an even cut. • Advantages • #hydraulic #punch #mechanical machine

#############################

New on site