How to Install Camber Bolts 20112015 Chevrolet Cruze

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=7XFJjPZhclc

Buy Now! • New Alignment Camber Kit from 1AAuto.com https://trq.video/ia-MGSFK00202 • New Alignment Camber Kit from 1AAuto.com https://trq.video/ia-MGSMX00056 • This video shows you how to install camber bolts on your 2011-2015 Chevrolet Cruze. • This repair was done on a 2013 Chevrolet Cruze LT 1.4L Sedan 4-Door FWD and the process should be similar on the following vehicles: • 2011 Chevrolet Cruze • 2012 Chevrolet Cruze • 2013 Chevrolet Cruze • 2014 Chevrolet Cruze • 2015 Chevrolet Cruze • Tools you will need: • • 14mm Wrench https://trq.video/oek-1AXAA00010 • • 18mm Wrench • • 15mm Socket https://trq.video/op8-1AXAA00015 • • 18mm Socket • • 19mm Socket • • Torque Wrench https://trq.video/ojG-1AXAA00044 • • Gloves https://trq.video/obJ-1AXSS00048 • • Safety Glasses • • Floor Jack https://trq.video/oeK-1AXAA00068 • • Hammer • • Wheel Chocks • Subscribe: / @trq • Check out our playlist: • Chevy Cruze 2011-2015 1st Gen: • Chevy Cruze 2011-2015 1st Gen • ⚠ DISCLAIMER: • While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

#############################

New on site