Youtor
Injection Molding Machine Operating Controls Part 1
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=7k4aud98-zE
Practical Injection Molding covers the fundamentals of injection molding technology, including foundation basic training that all employees involved with the injection molding process must understand. This knowledge will allow them to make the best, most informed decisions on the production floor. • More information is available at: • http://www.paulsontraining.com/produc... • This course is recommended for Injection Molding Machine Operators, Material Handlers, Set-up Personnel, Injection Molding Technicians and Production Supervisors. • The complete list of lessons in this injection molding training program is shown below. • Module 1 - Basic Injection Molding Operations • ------------------------------------------------------------------- • Lesson 1: Inside the Molding Machine • Lesson 2: Inside the Mold • Lesson 3: The Nature of Plastics • Lesson 4: Machine Operating Controls -- Part 1 • Lesson 5: Machine Operating Controls -- Part 2 • Module 2 -- SkillBuilder Lab Lessons for Injection Molding Basic Module • ---------------------------------------------------------------------------------------------------- • Lesson 1: Understanding the Injection Molding Process • Lesson 2: Setting Machine Controls • Lesson 3: Understanding Fill Rate Controls • Lesson 4: The Effects of Back Pressure • Lesson 5: Setting the Injection Limit Timer • Lesson 6: The Maximum Injection Pressure Settings • Lesson 7: Setting the Holding Timer • Lesson 8: Setting the Holding Pressure • Lesson 9: Mold Closed Time and Mold Open Time vs Melt Temperature • Lesson 10: The Effects of Barrel Zone Temperatures on the Melt Temperature • Lesson 11: Some Effects of the Mold Temperature • Lesson 12: The Effects of Screw RPM • Lesson 13: The Effect of the Screw Back Position • Lesson 14: Effects of Clamp Force • Lesson 15: Achieving and Controlling the Melt Temperature
#############################
