Self Adhered Flat Roof 2 ply System 2 Peel and Stick SA Plybase

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=7o6gHjJjEW8

Applying the self adhered or peel and stick base sheet for the Certainteed SA System. This is a 2 ply system for low slope or flat roof. • Self adhered or Peel and Stick material is not hard to install, but should be done correctly in order to make it last. The self adhered material will stick to just about anything, but bonding and staying for the life of the roof is a different story. Primer and knowing when to cold process are a very important part of the self adhered system. • This is a 4 part series with the first video being a summary of the entire flat roof and also the materials used. Some of the questions are answered in the summary that may not have been answered in the individual videos. • ***Video 1 - Summary - basic overview of work, materials, and alternate edge detail. • • Self Adhered Flat Roof 2 ply System 1... • ***Video 2 - Base Sheet - Applying 1 ply of Self Adhered Plybase to clean/new plywood. • • Self Adhered Flat Roof 2 ply System 2... • ***Video 3 - Cap Sheet - Applying Self Adhered Granulated Cap Sheet over 1 ply of plybase • • Self Adhered Flat Roof 2 ply System 3... • ***Video 4 - Dripedge install and strip in - Installing dripedge and stripping in with 12 strips of self adhered material by cold process adhesive. This is an alternate edge detail that I like to use based on experience. • • Self Adhered Flat Roof 2 ply System 4... • • SUBSCRIBE TO: • Practical Roofing Concepts YouTube Channel • / @practicalroofingconcepts

#############################

New on site