How to troubleshoot SUNMAX 70 Rideon floor scrubber that isnt dispensing watersuctioning water

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=7qXGsYvjCj8

When the SUNMAX RT70 or SM70 ride-on floor scrubber isn't dispensing or suctioning water, please follow the steps: • 1. Open the cover of the vacuum motor and check if it's loose. If it's loose, tighten the screws around the vacuum motor. • 2. Start the machine and ensure the wastewater tank cover is securely latched. • 3. Examine the filter screen inside the wastewater tank and remove any debris. • 4. Open the black cover. If there is debris, rinse it with water. • 5. Tighten the cover of the drainage pipe. • 6. Inspect the pipes for any damage or cracks. • 7. Check the rubber strip in the squeegee for any damage, and replace it immediately if it's torn. • 8. Verify that the water hoses are securely attached, ensuring they are clamped by the black clips and not loose. • This applies to SUNMAX RT70 and SM70 Ride-on floor scrubbers. If the situation consists, don't hesitate to get in touch with us at: • https://www.sunmaxfds.com/contact-8 • • #troubleshooting #floorscrubber #cleaningmachine #sanitmax #sunmax

#############################

New on site