Youtor
John Deere Tractor 3038e Checking Hydraulic Fluid
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=884Fka-iUxs
John Deere Original Equipment Gallon-Sized Hy-Gard Oil: https://amzn.to/3dCCqp6 • GET YOUR John Deere GEAR HERE: • John Deere Men's Trademark Logo Short Sleeve Tee: https://amzn.to/3Dr083s • John Deere Waxed Canvas Hat: https://amzn.to/3jwg2Sn • John Deere Gloves: https://amzn.to/3mOVlTy • After adding a grapple with a hydraulic ram cylinder, I thought it might be a good idea to check the hydraulic oil level. • Whether you own a small John Deere tractor for mowing your lawn, or you have a large one for doing your farm work, you never want to run the vehicle without sufficient hydraulic oil. Checking the hydraulic oil on a regular basis and topping it off when necessary should be a regular part of maintaining your John Deere tractor. • Step 1: Remove the cap from the fill reservoir for the hydraulic oil. On our John Deere 3038e tractor the reservoir is located just behind the driver's seat. • Step 2: Pull the dipstick out of the tube on the John Deere tractor. Check the level of hydraulic oil that registers on the dipstick. Do not add hydraulic oil to the tractor unless the level is low. • Step 3: Insert a funnel into the fill tube. Slowly pour the hydraulic oil into the funnel. Check the fluid level frequently. Stop adding hydraulic oil when the dipstick shows the level is full. Replace the cap on the fill tube.
#############################
