How to Remove and Install Ignition Key Lock CylinderGMC SierraSilveradoTahoeSuburban

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=8flEc6F9PcU

Buy me a coffee? https://www.buymeacoffee.com/diytechn... Buy me a coffee? https://www.buymeacoffee.com/diytechn... Stuck or need help? Call me right now and show me your problem: http://paltap.me/DIYTechnician. • Please feel free to contact me directly if you need a hand or this isn't the exact answer that you need! The first step of replacing the key lock cylinder is to disconnect the battery and remove the steering column covers. The reason I replaced this one is because it has broken plastic and the cylinder will not turn past the ON position. I went down to auto zone and picked on up for $50. One thing to realize is that now the door lock key will be different than the ignition key. To get this thing in and out, there is a little hole in which to insert something to depress the latch that allows the key lock to be inserted in and out. I used a scratch awl because it was the first thing I grabbed out of my toolbox that I found to fit but I'm sure there is a specially made tool out there just for this. The trick is that the key must be in the Start position for it to be slid in and out. Another thing to use is a sports ball inflation needle. Many of us have these laying around as well. Insert it into the hole and the key lock cylinder will easily slide in and out. Good to go. • I initially thought the problem was the key cylinder. I ended up replacing the whole steering column. I went to the junk yard and got one. • The joys of owning a GMC Sierra or Silverado are endless. There are many things to look forward to if you are choosing to be the proud owner of a GMC Sierra or Silverado. You can bet that the Service Tire Pressure Monitoring System dash warning light will come on at some point. You'll need to change the spark plugs and spark plug cables as well as change the oil. You likely need to know how to remove the tailgate as well as keep your tailgate from being stolen as they are really quick and easy to remove. Steering wheel replacement and possibly even steering column replacement. There's a chance that at some point you'll need to know how to remove or and least disconnect and re-connect the drive shaft. You'll need to know how to reset the change oil soon dash warning as well as what some of the common error codes are. • LInk to Code Reader: https://amzn.to/2YmSNN6 • https://www.DIY-technician.com

#############################

New on site