ZERO 10X LCD Settings

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=8tQyEEeieqM

In this tutorial, we teach you how to configure all the ZERO 8, 9, 10 and 10x LCD settings including the different fault codes of this e-scooter. The ZERO e-scooter has many functionalities that enable you to configure your ZERO scooter the way that best suits your needs. This tutorial only applies to the QS-S4 LCD throttle. • Here are the extent of the settings: • 1. P01 - LCD brightness level (1, 2, 3) • 2. P02 - Mileage display in km or miles • 3. P03 - Voltage level of machine (24, 36, 48, 52, 60V) • 4. P04 - 1-60 mins before machine goes to sleep with inactivity • 5. P05 - N/A • 6. P06 - Wheel diameter in inches • 7. P07 - No. of magnets on motor (Default 30) • 8. P08 - Power Level (0-100) • 9. P09 - Zero start or kickstart • 10. P10 - N/A • 11. P11 - Electronic braking on or off • 12. P12 - Soft or high acceleration (1 is softest start; 5 is highest torque) • 13. P13 and P14 - N/A • 14. P15 - Controller cutoff voltage • 15. P16 - Zero-ing of ODO • 16. P17 - cruise mode • 17. P18 to P20 - N/A • For the fault or error code video, do check out • • What are Error Codes on ZERO and VSET... • Fault Codes: • 2 - brake • 4 - 6kmh cruise • 6 - battery undervoltage • 7 - motor faulty • 8 - throttle faulty • 9 - controller faulty • 10 - faulty comms between controller and LCD • 11 - faulty comms between controller and LCD • 12 - BMS failure • 13 - headlight failure • For more information on the ZERO series of e-scooter, please check out https://www.falconpev.com.sg.

#############################

New on site