Crown Vic P71 amp P7B thermostat replacement and coolant refill

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=8xQi6W5hQBs

Got the P0128 code - turned out to be a bad thermostat stuck open. Replaced the thermostat and refilled the coolant using the Ford recommended fill procedure. • thermostat I used: https://amzn.to/3eXbrnJ • Motorcraft thermostat: https://amzn.to/2y1v65p • o-ring gasket https://amzn.to/2Se7rFU • http://www.WJHandyDad.com • #wjhandydad #crownvic #thermostat #P0128 • 0:00 resolving the check engine light P0128 • 0:42 what happened • 1:56 recap from prior Crown Vic thermostat video • 3:10 the process • 3:44 removing bolts • 5:35 replacement parts thermostat and o-ring gasket • 5:53 remove old thermostat • 6:38 refill coolant Ford technique • 8:04 install new thermostat and o-ring gasket • 8:23 I use anti-seize on bolts • 9:14 torque spec 15-22 ft-lb • 9:45 top off coolant overflow tank • 11:04 the engine running fill method • 12:26 topping off while engine running • 12:48 replace overflow tank cap • Disclaimer: • Due to factors beyond the control of WJ Handy Dad, I cannot guarantee against improper use or unauthorized modifications of this information. WJ Handy Dad assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. WJ Handy Dad recommends safe practices when working on vehicles/homes and or with tools seen or implied in this video. Due to factors beyond the control of WJ Handy Dad, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not WJ Handy Dad. • As an Amazon Associate I earn from qualifying purchases

#############################

New on site